Related Posts SB sway brace.
Compare Chevrolet Blazer Sway Bar Link Bushing Kit brands. Check prices & reviews on aftermarket & stock parts for your Blazer Sway Bar Link Bushing Kit. Order your parts online or pick them up in-store at your local Advance Auto Parts. 1. Remove the splash shield, tow hooks and license plate bracket. Discard the license plate bracket, but save all of the fasteners. 2.
Cut the sections of the air dam as shown in the illustration on page 2. Detach the driver-side sway bar from the frame and save the fasteners.
Pry down on the sway. Find replacement Front Sway Bar Bushings for your Chevrolet Blazer Blazer at bushcutting.bar stocks several brands of so you can find the perfect Front Sway Bar Bushings for your Chevrolet Blazer bushcutting.bar fast, free shipping on any Front Sway Bar Bushings that you purchase for your Chevrolet Blazer Blazer if the order is overAug 09, Remove each bolt and move the spacer on the underside of the frame rail, this should be plenty for a 4" lift.
If you have a floor jack and some ratchets it should take about 6 minutes to do. I've got 4" lift on both my 70 and 86, neither have sway bars and like SkullCrusher I don't drive like an idiot so I'm comfortable without it. Mar 22, Step 2 - Remove D Brackets.
Thread: Swaybar To remove or not to remove.
Once the car is lifted, the work should only take a few minutes. Locate the D brackets on the sway bar and loosen them to get to the bushings. Once you have removed the brackets, smear a healthy amount of lithium grease on the bushings. Once you have greased the bushings you can replace the D bracket and lower the.
Raise and safely support vehicle,3. remove tire, bushcutting.bar floor jack safely support the lower suspension arm and raise to remove pressure on the linkage bar between swaybar end and lower arm 5. remove the nut under the lower suspension arm that retains the swaybar linkage,6. loosen and remove nut at swaybar end. bushcutting.bar this time only lower the lower suspension arm enough to remove the linkage bar.
install new bushings or bar to the swaybar.