The decomposition, depending on the size of the stump, may take.

Stump Remover An easy way to remove tree stumps. Works by decomposing the wood of tree stumps, leaving them porous right down to the root tips.

Yes No 7 of 9 people found this answer helpful.

This allows easy removal or burning of the stump. Harmless to vegetation surrounding treated stumps. UPC Number 7 4 lbs 60 cases per pallet Application Rates. Spectracide Stump Remover Granules Revision date: 04/13/ Page 2 Notes to physician: None General advice: If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves.

Keep out of reach of children. Gordon’sStump Remover makes it easy! Use as an easy way to get rid of tree stumps. Decomposes wood making it porous down to the root. Ready-to-use formulation. Use kerosene to burn the stump 4 to 6 weeks after application.

To remove stumps, drill several 1-inch holes up to 12 inches deep into stump. Then into the side of the stump, approximately 3 to 4 inches from the top, drill a 1-inch hole slanting down to connect with the bottom of the center hole. Pour approximately 4 oz of Spectracide Stump Remover.

Hi-Yield Stump Remover is a product that decomposes the stump from the inside out. Hi-Yield Stump Remover makes the stump porous through out so that removing or burning is easier to do. Use the directions on the label for diagrams of where to drill holes in the stump for proper application. Hi-Yield Stump Remover will not harm surrounding vegetation.4/5(5).

Then into the side of the stump, approximately 3 to 4 inches from the top, drill a 1-inch hole slanting down to connect with the bottom of the center hole. Pour approximately 4 ounces of Spectracide stump remover granules into each hole. Then fill with hot water to 4/5.

Was this review helpful to you?

Mar 12, Then into the side of the stump, approximately 3 to 4 inches from the top, drill a 1-inch hole slanting down to connect with the bottom of the center hole. Pour approximately 4 ounces of Spectracide Stump Remover Granules into each hole. Then fill with hot water to dissolve the granules.

See label for complete directions/5.