I see you can burn them out but that's not a.

Oct 11, How to remove a leaf spring bushing without using an sort of press. This is the easiest way possible that i've learned works the best and the fastest for re.

Oct 20, Both tree removal charlottesville front and rear eye of the front and rear spring uses the same bushings. In one end bushing is a steel encased rubber bushing.

There is a steel inner sleeve, then rubber, then a steel outer shell. This outer shell is only about 1/16″ thick. The best way to remove these bushings is to use a torch and set the rubber on bushcutting.barted Reading Time: 1 min. Oct 15, Steps to Replace Leaf Spring Bushings. 1. Block the front wheels and raise the rear with a jack under the third member, lowering the vehicle onto stands under the frame.

2. Keep the jack under the rear end. Do one end of a single spring at a time, removing the bolt securing the spring into the front pocket and/or the leaf spring and frame bolts. Ford Explorer Leaf Springs. Can use for the front bushings by leaving the outer shells in the spring and order 2x and sleeves for the rear bushings.

The rear bushing is the same as a Ford Explorer.

Will they arch once they are unloaded and unbolted making it difficult to get back on?

And as a general Explorer spring note, the holes for the plastic pads is 1/2″ diameter, springs are /2″ bushcutting.bar Feb 17, I will be installing my lift shackles soon and wanted to know how some of you are removing the bushing from their leaf spring. I see you can burn them out but that's not a real option for me. Also you can wedge a chilsel between the section that wraps around and folds back. This will open the eye enough to drive the bushing out.